Home / 1 MHz-1 GHz 32 dB gain

1 MHz-1 GHz 32 dB gain

PAM-103, 1 MHz-1 GHz, 32 dB gain Preamplifier


The Dynamic Sciences PAM-103 is a general purpose, broadband, high gain, bench top preamplifier. The PAM-103 reduces floor noise and increases system sensitivity to low level signals during Electromagnetic Interference (EMC) testing. It also provides input isolation to your expensive test equipment. The PAM-103 operates from 1 MHz to 1000 MHz.
The simple front panel consists of two 50 Watt matched BNC connectors for input and output. The preamplifiers were designed to have minimal gain variation for the entire frequency range to reduce EMC measurement errors. The PAM-103 is individually calibrated and the gain data is shipped with the unit. Power to the PAM-103 is supplied by a 9 VAC, 1 AMP external wall mount adapter supplied with the preamplifier.

Wide Frequency Range: 1 MHz to 1 GHz
Internal Battery or AC Adapter Operation: Operates 13+ hours per charge
High Gain, Low Noise Figure: 33 dB Gain / 3.3 dB Noise Figure
Individual Calibration Include

Frequency Range: 1 MHz to 1 GHz
Preamplifier Gain: 33 dB (±3 dB)
Linear RF Input Range: < -30 dBµV to 89 dBµV
POUT @ 1 dB Compression: 18.3 dBm
POUT @ 3 dB Intercept (IP3): 32 dBm
Noise Figure: < 3.3 dB
Input Sensitivity: < -30 dBµV (< 31.6 nV)
VSWR (RF Input/Output Ports): 1.69:1 (maximum), 1.25:1 (average)
Return Loss (RF Input/Output Ports): 29.5 dB (minimum), 44 dB (average)
RF Connectors (Input/Output Ports): 50Ω N-Type (female)
Reverse Isolation: >40 dB (output port to input port)
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Max. RF Input Ratings: 107 dBµV (225 mV), 0 dBm (1 mW), 2 VDC
Battery Runtime: >13 Hours (with new, fully-charged batteries)
Power Input: 15 VDC, 500 mA (unregulated)
Dimensions (Height x Width x Depth): 2.3” x 6.6” x 8.3” (6 cm x 16.7 cm x 21 cm)
Weight: 3.2 lbs (1.45 kg)